Conversor CA-CC monofásico de estágio único empregando o conversor SEPIC com interruptores do lado CA

• Ano de defesa: 2015
• Autor(a) principal: Hirth, Marcos Paulo
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Tecnológica Federal do Paraná; Ponta Grossa; Brasil; Programa de Pós-Graduação em Engenharia Elétrica; UTFPR
• Palavras-chave em Português: Eletrônica de potência; Conversores de corrente elétrica; Circuitos elétricos; Power electronics; Electric current converters; Electric circuits; CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA; Engenharia Elétrica
• Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/2401

This work presents the analysis of a single-phase single-stage switched-mode power supply based on a SEPIC converter with AC-side switches. The SEPIC converter with AC-side switches has the benefit of having fewer semiconductors in conduction during a switching period when compared with the traditional topology. Thus, the overall efficiency is expected to increase. The input current is nearly sinusoidal without the use of a current loop control since the converter is operating in discontinuous conduction mode. A system disadvantage is related to the constraint in the choice of transformer turns, which leads to high current values in the secondary-side for lower output voltage specifications. The theoretical analysis, a design methodology and experimental results from a 300 W converter are presented. The converter was designed for a 127 V of input voltage, 200 V output voltage and switching frequency 50 kHz.