Aplicação da teoria de potência conservativa para monitoramento do comportamento do motor de indução trifásico sob distúrbios de qualidade de energia
Ano de defesa: | 2015 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Estadual Paulista (Unesp)
|
Programa de Pós-Graduação: |
Não Informado pela instituição
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Link de acesso: | http://hdl.handle.net/11449/132513 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/15-12-2015/000851683.pdf |
Resumo: | This dissertation aims to investigate the behavior of three-phase induction motor parameters (MIT) with squirrel cage rotor, mechanical nominal power of 3 HP, 220 V, 4poles, 60 Hz using the variables proposed by the Conservative Power Theory (CPT), operating under conditions of power quality disturbances. initially some disturbance conditions were determined, based in Module 8 of PRODIST ANEEL, involving voltage harmonic distortion (harmonic 3rd, 5th and 7 th order with amplitudes of 6,5% 7.5% and 6.5% of the fundamental respectively), voltage imbalance (2% amplitude imbalance factor, asymmetry, and both), sag (50% of the amplitude in the three phases for 5 and 30 cycles of the mains frequency), and voltage increase (increment 50% in the amplitude of the voltages for 5 and 30 cycles). These disorders were applied to a three-phase induction motor in steady condition with rated torque lead. The MIT model is represented by the transformation of the stator and rotor variables for the dq axes in an synchronous reference frame, permiting the check of the dynamic behavior of this machine in these conditions. Every simulation structure and data aquisition was developed in PSIM software. Through simulations it was possible to evaluate the behavior of the indices of CPT and relationship between some indices and machine parameters |