Desenvolvimento Hardware in the loop para avaliação de reguladores de tensão na distribuição

• Ano de defesa: 2019
• Autor(a) principal: Bezerra, Marcelle Alves
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal do Rio de Janeiro; Brasil; Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia; Programa de Pós-Graduação em Engenharia Elétrica; UFRJ
• Palavras-chave em Português: Hardware in the loop; Controle de tensão; Geração distribuída; CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
• Link de acesso: http://hdl.handle.net/11422/14035

[EN] This work presents the application of the hardware in the loop technique for the evaluation of a voltage regulator controller, the SEL 2431. Using a simulated distributed network with high penetration of solar generation in the OpenDSS program and sending and receiving analog/digital signals from this network to the controller through programming developed in LabVIEW environment, it was possible to apply the closed loop. Through this technique, a simulation was developed in LabVIEW that allowed the application of different load and generation profiles for the control in order to reproduce in laboratory representative conditions of a day of operation for this equipment inserted in the network in question. Under these conditions, the traditional voltage measurement of voltage regulators, line drop compensation, and remote measurement, a plausible reality within the context of smart grids, have been applied.