Avaliação do sistema de aderência entre argamassas colantes no assentamento de piso sobre piso
Ano de defesa: | 2020 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Minas Gerais
Brasil ENG - DEPARTAMENTO DE ENGENHARIA MATERIAIS E DA CONSTRUÇÃO CIVIL Programa de Pós-Graduação em Construção Civil UFMG |
Programa de Pós-Graduação: |
Não Informado pela instituição
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Link de acesso: | http://hdl.handle.net/1843/35518 |
Resumo: | This work has the general objective of evaluating the adhesion of different brands of adhesive mortars floor to floor when laying ceramic tiles with low porosity, especially porcelain tiles. The adhesion resistance at the interface between the enameled part of the ceramic plate and the back of porcelain tile were also objects of this study. Throught the pullout test, it was found that none of the three mortars reached the resistance recommended by 0,3 MPa, following NBR 13.753 – External or internal floor covering with ceramic plates and using adhesive mortar (ABNT, 1996). With the realization of digital electron microscopic analysis, it was observed that the specimens that showed lower values of adhesion resistance, had less apparent surface porosity and the specimens that presented a greater porosity had a higher performance in terms of adhesion resistance. |