Detalhes bibliográficos
| Ano de defesa: |
2009 |
| Autor(a) principal: |
Dias, Cristiane de Abreu
 |
| Orientador(a): |
Nobre, Marcos Augusto de Lima
|
| Banca de defesa: |
Lopes, Mauro Chierici
,
Andrade, André Vitor Chaves de
|
| Tipo de documento: |
Dissertação
|
| Tipo de acesso: |
Acesso aberto |
| Idioma: |
por |
| Instituição de defesa: |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA
|
| Programa de Pós-Graduação: |
Programa de Pós-Graduação em Química Aplicada
|
| Departamento: |
Química
|
| País: |
BR
|
| Palavras-chave em Português: |
|
| Palavras-chave em Inglês: |
|
| Área do conhecimento CNPq: |
|
| Link de acesso: |
http://tede2.uepg.br/jspui/handle/prefix/2062
|
Resumo: |
Throughout the times, new pigment systems have been gradually developed. In the nowadays, the development of ceramic pigments represents a part of the Materials Science, where there is a lack of concepts, roles and strategies, which in goal allows the developing of new rotes of preparing or pigments, in both scientific and technological areas. This work deals with the development of an innovative processing route and characterization of ceramic pigments based on the formation of solid solution of zircon silicate via doping with manganese cations being the source of manganese cations a waste of alkaline battery. In fact, an electrolytic paste of zinc-carbon batteries was used as a starting precursor of the manganese oxide, major component of the electrolytic paste, as a precursor of the chromophore agent. As a standard, Mn doped ZrSiO4 pigments were prepared via mechanical mixture of oxides process using analytical MnO2 (P.A.) oxide as a starting precursor of manganese cations. Powder mixtures exhibiting different percentages in weight of electrolytic paste were homogenized in the isopropyl alcohol via ball milling during 6 h. In the sequence, precursors were dried in furnace type oven at 110°C until the weight stabilizing giving the precursor of the pigment. Then, the precursor was calcined, desagglomerated and sieved (350 mesh).The precursor calcination was carried out in an oven furnace at 1150°C with a soaking time of 4h, in air atmosphere, heating rate of 10°C/min, cooling rate stemming from high temperature to the room temperature was carried out via natural rate of the furnace. After the calcination of precursor, powders were characterized by scanning electron microscopy, X-ray diffraction, UV-Vis spectroscopy and laser granulometry, so the crystalline phases, microstructure, the colorimetric parameters and the some spectroscopic properties of pigments were determined. Pigment exhibiting the highest color intensity was obtained using higher fraction of electrolytic paste. As a whole, pigments proved to be chemically and thermally resistant at 800°C, when applied in vitreous enamels with industrial composition directed to ceramic plating. Pigments showed excellent dispersion degree in a low-density polyethylene and a homogeneous color. |
