Metodologia para o desenvolvimento de antenas baseada em intelig??ncia computacional

Detalhes bibliográficos
Ano de defesa: 2021
Autor(a) principal: Melo, Marcello Caldano
Orientador(a): Sodr?? Junior, Arismar Cerqueira lattes
Banca de defesa: Sodre Junior, Arismar Cerqueira lattes, Bastos Filho, Carmelo Jose Albanez lattes, Figueiredo, Felipe Augusto Pereira de lattes, Moreira Neto, Joao Roberto lattes, Brito, Jose Marcos Camara lattes
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Instituto Nacional de Telecomunica????es
Programa de Pós-Graduação: Mestrado em Engenharia de Telecomunica????es
Departamento: Instituto Nacional de Telecomunica????es
País: Brasil
Palavras-chave em Português:
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: https://tede.inatel.br:8080/tede/handle/tede/220
Resumo: The antenna design is a challenging task, which might be time-consuming using computational methods that typically require high computational capability, due to the need for several sweeps and re-running processes. This work proposes an efficient and accurate computational intelligence-based methodology for antenna design and optimization. The computational technical solution consists of a surrogate model application, composed of a Multilayer Perceptron (MLP) artificial neural network with backpropagation for the regression process. Combined with the model, two multiobjective optimization meta-heuristic strategies, Non-dominated Sorting Genetic Algorithm (NSGA-II) and Multiobjective Evolutionary Algorithm based on Decomposition (MOEA/D), are used to overcome the mentioned issues from the antenna design traditional method. As proof of the proposed methodology concept, three studies of case are reported: a half-wavelength dipole; a complete-wavelength dipole; Quasi-Yagi antenna. Comparisons between the models developed with the proposed methodology and results by the full-wave numerical simulations software from ANSYS HFSS are performed aiming to demonstrate the developed methodology application and efficiency. According to the proposed methodology, the matched port printed dipole antenna input-output sets were obtained in 53 seconds by the NSGA-II algorithm to maximize the bandwidth centered at 3.5 GHz, which resulted in 18 % operation band centered at 3.53 GHz. In the matching impedance structure printed dipole, the optimal dimensions were obtained in 5 seconds aiming to maximize the bandwidth centered at 3.5 GHz. The estimated output was 21.4% band centered at 3.5 GHz. Finally, for QuasiYagi design and optimization, the NSGA-II algorithm spent 2 minutes to find the best impedance matching structure dimensions that minimize simultaneously the reflection coefficient at 1.9, 2.6, and 3.5 GHz. The obtained results prove the methodology potential as a complementary alternative to the electromagnetic simulation software for antenna design and optimization.