Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado

Bibliographic Details
Main Author: Barbosa, Danilo
Publication Date: 2013
Other Authors: Pereira, Diego Souza, Wieler, Rafael
Format: Bachelor thesis
Language: por
Source: Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
Download full: http://repositorio.utfpr.edu.br/jspui/handle/1/9970
Summary: This present work discusses two studies that were analyzed in parallel during its development. Two design of photovoltaic isolated systems was held applied as the power source for the residential lighting circuit only. The other study, includes a comparison between fluorescent lamps with LED lamps applying its in a residence, sizing through specific brazilian standards. In the case of LEDs, there are no standards for implementation the residential luminotechnical projects. For this reason, it was prepared primarily a luminotechnical project for fluorescent lamps, acconding to brazilian standards. Therefore, it was adopted as a criterion for the sizing parameter of the lamps´s luminous flux, being a common factor between the choose LED lamps and fluorescent lamps with looking over the specifications that resemble to fluorescent, especially about the lamps´s luminous flux, colour rendering índex (CRI), colour temperature, and also, with the best possible scattering of light on areas inside the residence. After the lamps being chosen, both the LEDs as the fluorescent it was made the load forecasting for both residential lighting circuit proposed, providing the basis for the photovoltaic dimensioning being independent of each other. The main objective it is evident the photovoltaic system, which applied to lighting circuit with LEDs or fluorescent lamps, bring better energy and financial benefits in their implementation in a residence. For study effects, it was chosen a house situated in Piraquara city, in Parana state, which in this time of the development of this work it was with some backlog in civil construction services. After being determinated the necessary parameters for photovoltaic systems dimensioning, as local solar radiation levels estimates annually and forecasting loads of lighting circuit among the study, it was developed a prototype representing a sampling test of the two photovoltaic projects, one for being applied to lighting of the residence consist of fluorescent lamps, and the other one applied to LED lamps. As sampling was chosen one of the rooms of the residence. Thus, the luminotechnical parameters were checked, like the measurements of illuminances verification of scattering of light in the room, procedures that were done according to brazilian standards. In Parallel, data were registered for the daily behavior of electrical parameters involved with the prototypes of photovoltaic systems, such as voltage and current input to the inverter, charge controller, among others. Finally, after evidencing the correct functioning of the prototypes developed, it was analyzed the data through charts as well as the analysis of the energy benefits and costs to implement the best photovoltaic system applied in isolated residential lighting.
id UTFPR-12_4c11e36a1a8712b401cc33e2c19e7363
oai_identifier_str oai:repositorio.utfpr.edu.br:1/9970
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isoladoIluminação elétricaIluminação de interioresDiodos emissores de luzLâmpadas fluorescentesElectric lightingInterior lightingLight emitting diodesFluorescent lampsEngenharia ElétricaThis present work discusses two studies that were analyzed in parallel during its development. Two design of photovoltaic isolated systems was held applied as the power source for the residential lighting circuit only. The other study, includes a comparison between fluorescent lamps with LED lamps applying its in a residence, sizing through specific brazilian standards. In the case of LEDs, there are no standards for implementation the residential luminotechnical projects. For this reason, it was prepared primarily a luminotechnical project for fluorescent lamps, acconding to brazilian standards. Therefore, it was adopted as a criterion for the sizing parameter of the lamps´s luminous flux, being a common factor between the choose LED lamps and fluorescent lamps with looking over the specifications that resemble to fluorescent, especially about the lamps´s luminous flux, colour rendering índex (CRI), colour temperature, and also, with the best possible scattering of light on areas inside the residence. After the lamps being chosen, both the LEDs as the fluorescent it was made the load forecasting for both residential lighting circuit proposed, providing the basis for the photovoltaic dimensioning being independent of each other. The main objective it is evident the photovoltaic system, which applied to lighting circuit with LEDs or fluorescent lamps, bring better energy and financial benefits in their implementation in a residence. For study effects, it was chosen a house situated in Piraquara city, in Parana state, which in this time of the development of this work it was with some backlog in civil construction services. After being determinated the necessary parameters for photovoltaic systems dimensioning, as local solar radiation levels estimates annually and forecasting loads of lighting circuit among the study, it was developed a prototype representing a sampling test of the two photovoltaic projects, one for being applied to lighting of the residence consist of fluorescent lamps, and the other one applied to LED lamps. As sampling was chosen one of the rooms of the residence. Thus, the luminotechnical parameters were checked, like the measurements of illuminances verification of scattering of light in the room, procedures that were done according to brazilian standards. In Parallel, data were registered for the daily behavior of electrical parameters involved with the prototypes of photovoltaic systems, such as voltage and current input to the inverter, charge controller, among others. Finally, after evidencing the correct functioning of the prototypes developed, it was analyzed the data through charts as well as the analysis of the energy benefits and costs to implement the best photovoltaic system applied in isolated residential lighting.O presente trabalho aborda dois estudos que foram analisados paralelamente durante seu desenvolvimento. Realizou-se dois dimensionamentos de sistemas fotovoltaicos isolados aplicados como fonte de alimentação para o circuito de iluminação residencial, apenas. O outro estudo, abrange a comparação de lâmpadas fluorescentes com as lâmpadas LEDs, quando aplicadas em uma residência, seguindo o dimensionamento por normas brasileiras específicas. No caso das lâmpadas LEDs, ainda não há normatização definida para os dimensionamentos luminotécnicos residênciais. Por este motivo, elaborou-se primeiramente um projeto luminotécnico para as lâmpadas fluorescentes, respeitando normas brasileiras de projeto. Por conseguinte, adotou-se como critério de dimensionamento o parâmetro dos fluxos luminosos das lâmpadas, sendo um fator comum entre a escolha das lâmpadas LEDs e fluorescentes, procurando lâmpadas com as especificações que mais se assemelham às fluorescentes, principalmente quanto ao fluxo luminoso, IRC (Índice de Reprodução de Cor), Temperatura de Cor, e ainda, com melhor espalhamento possível da luz no ambiente. Após a escolha das lâmpadas, tanto das LEDs quanto das fluorescentes, foram realizadas as previsões de cargas para os dois circuitos de iluminação propostos para a residência, servindo de base para os dimensionamentos fotovoltaicos, sendo independente um do outro. O objetivo em questão, se trata de evidenciar o sistema fotovoltaico, que aplicado à iluminação com lâmpadas LEDs ou fluorescentes, trazem melhores benefícios energéticos e financeiros na sua implantação em uma residência. Para efeitos de estudo, escolheu-se uma casa situada em Piraquara - PR, que no momento do desenvolvimento deste trabalho se encontrou com algumas pendências em serviços de construção civil. Após serem levantados os parâmetros necessários para os dimensionamentos fotovoltaicos, como níveis de radiação do local estimado anualmente e previsão de cargas do circuito de iluminação em estudo, desenvolveu-se um protótipo para fins de representação de uma amostragem dos ensaios dos dois projetos fotovoltaicos, um para aplicação na iluminação da residência constituídos por lâmpadas fluorescentes, e o outro, aplicado para lâmpadas LEDs. Como amostragem, escolheu-se um dos cômodos da residência. Desta forma, foram verificados os parâmetros luminotécnicos, como medições de iluminâncias e verificação do espalhamento da luz no ambiente, procedimentos que foram seguidos por norma brasileira. Paralelamente, foram aquisitados dados do comportamento diário dos parâmetros elétricos envolvidos com os protótipos de sistemas fotovoltaicos, tais como tensões e correntes de entrada no inversor, controlador de carga, dentre outros. Finalmente, após constatar o funcionamento correto dos protótipos desenvolvidos, foram analisados os dados obtidos por meio de gráficos e, finalmente, analisados os benefícios energéticos e os custos para implantação do melhor sistema fotovoltaico isolado quando aplicado na iluminação residencial.Universidade Tecnológica Federal do ParanáCuritibaDepartamento Acadêmico de EletrotécnicaAlves, Gilberto ManoelBarbosa, DaniloPereira, Diego SouzaWieler, Rafael2020-11-12T17:01:34Z2020-11-12T17:01:34Z2013-04-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfBARBOSA, Danilo; PEREIRA, Diego Souza; WIELER, Rafael. Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado. 2013. 291 f. Trabalho de Conclusão de Curso (Graduação) – Universidade Tecnológica Federal do Paraná, Curitiba, 2013.http://repositorio.utfpr.edu.br/jspui/handle/1/9970porreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPRinfo:eu-repo/semantics/openAccess2020-11-12T17:01:34Zoai:repositorio.utfpr.edu.br:1/9970Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.bropendoar:2020-11-12T17:01:34Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
title Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
spellingShingle Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
Barbosa, Danilo
Iluminação elétrica
Iluminação de interiores
Diodos emissores de luz
Lâmpadas fluorescentes
Electric lighting
Interior lighting
Light emitting diodes
Fluorescent lamps
Engenharia Elétrica
title_short Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
title_full Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
title_fullStr Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
title_full_unstemmed Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
title_sort Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado
author Barbosa, Danilo
author_facet Barbosa, Danilo
Pereira, Diego Souza
Wieler, Rafael
author_role author
author2 Pereira, Diego Souza
Wieler, Rafael
author2_role author
author
dc.contributor.none.fl_str_mv Alves, Gilberto Manoel
dc.contributor.author.fl_str_mv Barbosa, Danilo
Pereira, Diego Souza
Wieler, Rafael
dc.subject.por.fl_str_mv Iluminação elétrica
Iluminação de interiores
Diodos emissores de luz
Lâmpadas fluorescentes
Electric lighting
Interior lighting
Light emitting diodes
Fluorescent lamps
Engenharia Elétrica
topic Iluminação elétrica
Iluminação de interiores
Diodos emissores de luz
Lâmpadas fluorescentes
Electric lighting
Interior lighting
Light emitting diodes
Fluorescent lamps
Engenharia Elétrica
description This present work discusses two studies that were analyzed in parallel during its development. Two design of photovoltaic isolated systems was held applied as the power source for the residential lighting circuit only. The other study, includes a comparison between fluorescent lamps with LED lamps applying its in a residence, sizing through specific brazilian standards. In the case of LEDs, there are no standards for implementation the residential luminotechnical projects. For this reason, it was prepared primarily a luminotechnical project for fluorescent lamps, acconding to brazilian standards. Therefore, it was adopted as a criterion for the sizing parameter of the lamps´s luminous flux, being a common factor between the choose LED lamps and fluorescent lamps with looking over the specifications that resemble to fluorescent, especially about the lamps´s luminous flux, colour rendering índex (CRI), colour temperature, and also, with the best possible scattering of light on areas inside the residence. After the lamps being chosen, both the LEDs as the fluorescent it was made the load forecasting for both residential lighting circuit proposed, providing the basis for the photovoltaic dimensioning being independent of each other. The main objective it is evident the photovoltaic system, which applied to lighting circuit with LEDs or fluorescent lamps, bring better energy and financial benefits in their implementation in a residence. For study effects, it was chosen a house situated in Piraquara city, in Parana state, which in this time of the development of this work it was with some backlog in civil construction services. After being determinated the necessary parameters for photovoltaic systems dimensioning, as local solar radiation levels estimates annually and forecasting loads of lighting circuit among the study, it was developed a prototype representing a sampling test of the two photovoltaic projects, one for being applied to lighting of the residence consist of fluorescent lamps, and the other one applied to LED lamps. As sampling was chosen one of the rooms of the residence. Thus, the luminotechnical parameters were checked, like the measurements of illuminances verification of scattering of light in the room, procedures that were done according to brazilian standards. In Parallel, data were registered for the daily behavior of electrical parameters involved with the prototypes of photovoltaic systems, such as voltage and current input to the inverter, charge controller, among others. Finally, after evidencing the correct functioning of the prototypes developed, it was analyzed the data through charts as well as the analysis of the energy benefits and costs to implement the best photovoltaic system applied in isolated residential lighting.
publishDate 2013
dc.date.none.fl_str_mv 2013-04-09
2020-11-12T17:01:34Z
2020-11-12T17:01:34Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/bachelorThesis
format bachelorThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv BARBOSA, Danilo; PEREIRA, Diego Souza; WIELER, Rafael. Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado. 2013. 291 f. Trabalho de Conclusão de Curso (Graduação) – Universidade Tecnológica Federal do Paraná, Curitiba, 2013.
http://repositorio.utfpr.edu.br/jspui/handle/1/9970
identifier_str_mv BARBOSA, Danilo; PEREIRA, Diego Souza; WIELER, Rafael. Análise comparativa de protótipos de sistemas de iluminação residencial fluorescente e LED alimentados por sistema fotovoltaico isolado. 2013. 291 f. Trabalho de Conclusão de Curso (Graduação) – Universidade Tecnológica Federal do Paraná, Curitiba, 2013.
url http://repositorio.utfpr.edu.br/jspui/handle/1/9970
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Departamento Acadêmico de Eletrotécnica
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Departamento Acadêmico de Eletrotécnica
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br
_version_ 1834836449061502976