Export Ready — 

Autocicatrização de concretos com uso de aditivo cristalizante

Bibliographic Details
Main Author: Tambara, Rafael Fumaco
Publication Date: 2024
Format: Master thesis
Language: por
Source: Repositório Institucional da UNIPAMPA
Download full: https://repositorio.unipampa.edu.br/jspui/handle/riu/9469
Summary: This study investigated the influence of the incorporation of a crystalline admixture (CA) on self-healing in structural concretes made with Portland cement (CP-V ARI-RS) and subjected to pre-loading by axial compression at different ages (7 and 28 days). For each loading age, three samples of each mix were tested for compressive strength, and the average rupture value was used to determine the percentage of load that would be applied to the concrete (0%, 50%, and 80% of the average fck). To stimulate self-healing, the samples were submerged in water from when they were produced until their respective test ages. The samples were only removed from curing during the pre-loading stage. Samples preloaded at 7 days were tested at 14, 28, 56, and 91 days, while samples preloaded at 28 days were tested at 35, 56, and 91 days. The control tests selected were axial compressive strength, water absorption by capillarity (Kelham method), and ultrasonic wave propagation velocity. In addition, some samples were analyzed using optical microscopy images to monitor the formation of self-healing products over time. The results obtained allow us to conclude that (i) the axial compressive strength test showed that concrete with CA and without loading had the best mechanical performance of the mixtures investigated; (ii) the evaluation of ultrasonic wave propagation velocity with time variation showed an increase in ultrasonic velocity in concretes incorporating CA and preloaded at 7 and 28 days, regardless of the percentage of loading applied (0%, 50% and 80%), indicating the repair of microcracks; (iii) concretes that were not preloaded showed similar patterns of reduction in average values of water absorption capillarity, regardless of the presence of the crystalline admixture. However, it is noteworthy that the concrete with added CA showed superior resistance to water absorption compared to the reference concrete, especially under pre-loading conditions; (iv) for optical microscopy image analysis, the reference concretes showed no significant surface healing, while the concretes with added CA showed partial filling of the cracks through the precipitation of calcium carbonate. In short, the tests carried out in this research corroborate the benefits of adding a crystalline admixture to concrete, especially its ability to self-heal.
id UNIP_9fbef9d81526b263cf28f45425140eb4
oai_identifier_str oai:repositorio.unipampa.edu.br:riu/9469
network_acronym_str UNIP
network_name_str Repositório Institucional da UNIPAMPA
repository_id_str
spelling Autocicatrização de concretos com uso de aditivo cristalizanteEngenhariaAditivo cristalizanteConcretoEngineeringCrystallizing additiveConcreteCNPQ::ENGENHARIASThis study investigated the influence of the incorporation of a crystalline admixture (CA) on self-healing in structural concretes made with Portland cement (CP-V ARI-RS) and subjected to pre-loading by axial compression at different ages (7 and 28 days). For each loading age, three samples of each mix were tested for compressive strength, and the average rupture value was used to determine the percentage of load that would be applied to the concrete (0%, 50%, and 80% of the average fck). To stimulate self-healing, the samples were submerged in water from when they were produced until their respective test ages. The samples were only removed from curing during the pre-loading stage. Samples preloaded at 7 days were tested at 14, 28, 56, and 91 days, while samples preloaded at 28 days were tested at 35, 56, and 91 days. The control tests selected were axial compressive strength, water absorption by capillarity (Kelham method), and ultrasonic wave propagation velocity. In addition, some samples were analyzed using optical microscopy images to monitor the formation of self-healing products over time. The results obtained allow us to conclude that (i) the axial compressive strength test showed that concrete with CA and without loading had the best mechanical performance of the mixtures investigated; (ii) the evaluation of ultrasonic wave propagation velocity with time variation showed an increase in ultrasonic velocity in concretes incorporating CA and preloaded at 7 and 28 days, regardless of the percentage of loading applied (0%, 50% and 80%), indicating the repair of microcracks; (iii) concretes that were not preloaded showed similar patterns of reduction in average values of water absorption capillarity, regardless of the presence of the crystalline admixture. However, it is noteworthy that the concrete with added CA showed superior resistance to water absorption compared to the reference concrete, especially under pre-loading conditions; (iv) for optical microscopy image analysis, the reference concretes showed no significant surface healing, while the concretes with added CA showed partial filling of the cracks through the precipitation of calcium carbonate. In short, the tests carried out in this research corroborate the benefits of adding a crystalline admixture to concrete, especially its ability to self-heal.Este trabalho investigou a influência da incorporação de um aditivo cristalizante nacional no fenômeno da autocicatrização de concretos estruturais produzidos com cimento Portland (CP V ARI – RS) e submetidos a pré-carregamentos por compressão axial em diferentes idades (7 e 28 dias). Para cada idade de carregamento foram rompidas até o limite três amostras de cada traço e a partir do valor médio de ruptura foi determinado o percentual de carga que seriam aplicados em parte dos concretos (0%, 50% e 80% do fck,méd). Visando estimular a autocicatrização, as amostras permaneceram em cura submersa desde a sua produção até as suas respectivas idades de ensaio, sendo retiradas da cura apenas para a etapa de pré-carregamento e posteriormente retornando para a mesma. As amostras pré-carregadas aos 7 dias foram ensaiadas aos 14, 28, 56 e 91 dias, enquanto que as amostras pré-carregadas aos 28 dias foram ensaiadas aos 35, 56 e 91 dias. Os ensaios de controle selecionados foram de Resistência à Compressão Axial, Absorção de Água por Capilaridade (Método de Kelham) e Velocidade de Propagação de Onda Ultrassônica. Além disso, algumas amostras foram analisadas por meio de imagens de Microscopia Óptica para monitorar a formação dos produtos de autocicatrização ao longo do tempo. Os resultados obtidos permitem concluir que: (i) através do ensaio de resistência à compressão axial constatou-se que os concretos com aditivo cristalizante (CA) sem aplicação de carregamento apresentaram um melhor desempenho mecânico entre as misturas investigadas; (ii) a avaliação da velocidade de propagação de onda ultrassônica com a variação do tempo mostrou um aumento da velocidade ultrassônica nos concretos com incorporação de CA e pré-carregados nas idades de 7 e 28 dias, independentemente do percentual de carregamento aplicado (0%, 50% e 80%), indicando a reparação das microfissuras; (iii) quanto a absorção de água por capilaridade, os concretos que não foram submetidos a pré-carregamento exibiram padrões semelhantes de redução na absorção média, independentemente da presença do aditivo cristalizante. No entanto, destaca-se que o concreto com adição de CA demonstrou uma resistência superior à absorção de água em comparação com o concreto de referência, especialmente sob condições de pré-carregamento; (iv) para análise de imagem por microscopia óptica os concretos referência não apresentaram cicatrização superficial relevante, enquanto que os concretos com adição de CA apresentaram preenchimento parcial das fissuras, por meio da precipitação do carbonato de cálcio. Em suma, os ensaios realizados nesta pesquisa corroboram os benefícios da adição de aditivo cristalizante aos concretos, especialmente no que diz respeito à capacidade de autocicatrização.Universidade Federal do PampaUNIPAMPAMestrado Acadêmico em EngenhariaBrasilCampus AlegreteCosta, Fernanda Bianchi Pereira daVenquiaruto, Simone DornellesTambara, Rafael Fumaco2024-08-01T21:29:48Z2024-08-01T21:29:48Z2024-07-18info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfTAMBARA, Rafael Fumaco. Autocicatrização de concretos com uso de aditivo cristalizante. 167p. 2024. Orientadora: Fernanda Bianchi Pereira da Costa. Dissertação (Mestrado em Engenharia) – Universidade Federal do Pampa, Campus Alegrete, 2024.https://repositorio.unipampa.edu.br/jspui/handle/riu/9469porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UNIPAMPAinstname:Universidade Federal do Pampa (UNIPAMPA)instacron:UNIPAMPA2024-08-01T21:29:48Zoai:repositorio.unipampa.edu.br:riu/9469Repositório InstitucionalPUBhttp://dspace.unipampa.edu.br:8080/oai/requestsisbi@unipampa.edu.bropendoar:2024-08-01T21:29:48Repositório Institucional da UNIPAMPA - Universidade Federal do Pampa (UNIPAMPA)false
dc.title.none.fl_str_mv Autocicatrização de concretos com uso de aditivo cristalizante
title Autocicatrização de concretos com uso de aditivo cristalizante
spellingShingle Autocicatrização de concretos com uso de aditivo cristalizante
Tambara, Rafael Fumaco
Engenharia
Aditivo cristalizante
Concreto
Engineering
Crystallizing additive
Concrete
CNPQ::ENGENHARIAS
title_short Autocicatrização de concretos com uso de aditivo cristalizante
title_full Autocicatrização de concretos com uso de aditivo cristalizante
title_fullStr Autocicatrização de concretos com uso de aditivo cristalizante
title_full_unstemmed Autocicatrização de concretos com uso de aditivo cristalizante
title_sort Autocicatrização de concretos com uso de aditivo cristalizante
author Tambara, Rafael Fumaco
author_facet Tambara, Rafael Fumaco
author_role author
dc.contributor.none.fl_str_mv Costa, Fernanda Bianchi Pereira da
Venquiaruto, Simone Dornelles
dc.contributor.author.fl_str_mv Tambara, Rafael Fumaco
dc.subject.por.fl_str_mv Engenharia
Aditivo cristalizante
Concreto
Engineering
Crystallizing additive
Concrete
CNPQ::ENGENHARIAS
topic Engenharia
Aditivo cristalizante
Concreto
Engineering
Crystallizing additive
Concrete
CNPQ::ENGENHARIAS
description This study investigated the influence of the incorporation of a crystalline admixture (CA) on self-healing in structural concretes made with Portland cement (CP-V ARI-RS) and subjected to pre-loading by axial compression at different ages (7 and 28 days). For each loading age, three samples of each mix were tested for compressive strength, and the average rupture value was used to determine the percentage of load that would be applied to the concrete (0%, 50%, and 80% of the average fck). To stimulate self-healing, the samples were submerged in water from when they were produced until their respective test ages. The samples were only removed from curing during the pre-loading stage. Samples preloaded at 7 days were tested at 14, 28, 56, and 91 days, while samples preloaded at 28 days were tested at 35, 56, and 91 days. The control tests selected were axial compressive strength, water absorption by capillarity (Kelham method), and ultrasonic wave propagation velocity. In addition, some samples were analyzed using optical microscopy images to monitor the formation of self-healing products over time. The results obtained allow us to conclude that (i) the axial compressive strength test showed that concrete with CA and without loading had the best mechanical performance of the mixtures investigated; (ii) the evaluation of ultrasonic wave propagation velocity with time variation showed an increase in ultrasonic velocity in concretes incorporating CA and preloaded at 7 and 28 days, regardless of the percentage of loading applied (0%, 50% and 80%), indicating the repair of microcracks; (iii) concretes that were not preloaded showed similar patterns of reduction in average values of water absorption capillarity, regardless of the presence of the crystalline admixture. However, it is noteworthy that the concrete with added CA showed superior resistance to water absorption compared to the reference concrete, especially under pre-loading conditions; (iv) for optical microscopy image analysis, the reference concretes showed no significant surface healing, while the concretes with added CA showed partial filling of the cracks through the precipitation of calcium carbonate. In short, the tests carried out in this research corroborate the benefits of adding a crystalline admixture to concrete, especially its ability to self-heal.
publishDate 2024
dc.date.none.fl_str_mv 2024-08-01T21:29:48Z
2024-08-01T21:29:48Z
2024-07-18
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv TAMBARA, Rafael Fumaco. Autocicatrização de concretos com uso de aditivo cristalizante. 167p. 2024. Orientadora: Fernanda Bianchi Pereira da Costa. Dissertação (Mestrado em Engenharia) – Universidade Federal do Pampa, Campus Alegrete, 2024.
https://repositorio.unipampa.edu.br/jspui/handle/riu/9469
identifier_str_mv TAMBARA, Rafael Fumaco. Autocicatrização de concretos com uso de aditivo cristalizante. 167p. 2024. Orientadora: Fernanda Bianchi Pereira da Costa. Dissertação (Mestrado em Engenharia) – Universidade Federal do Pampa, Campus Alegrete, 2024.
url https://repositorio.unipampa.edu.br/jspui/handle/riu/9469
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal do Pampa
UNIPAMPA
Mestrado Acadêmico em Engenharia
Brasil
Campus Alegrete
publisher.none.fl_str_mv Universidade Federal do Pampa
UNIPAMPA
Mestrado Acadêmico em Engenharia
Brasil
Campus Alegrete
dc.source.none.fl_str_mv reponame:Repositório Institucional da UNIPAMPA
instname:Universidade Federal do Pampa (UNIPAMPA)
instacron:UNIPAMPA
instname_str Universidade Federal do Pampa (UNIPAMPA)
instacron_str UNIPAMPA
institution UNIPAMPA
reponame_str Repositório Institucional da UNIPAMPA
collection Repositório Institucional da UNIPAMPA
repository.name.fl_str_mv Repositório Institucional da UNIPAMPA - Universidade Federal do Pampa (UNIPAMPA)
repository.mail.fl_str_mv sisbi@unipampa.edu.br
_version_ 1842255684107763712