Exportação concluída — 

Effect of melt viscosity on the ejection force in injection moulds

Detalhes bibliográficos
Autor(a) principal: Pontes, A. J.
Data de Publicação: 2004
Outros Autores: Brito, A. M., Pouzada, A. S.
Idioma: eng
Título da fonte: Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
Texto Completo: https://hdl.handle.net/1822/34148
Resumo: This paper shows data on the ejection force of injection mouldings. The tubular mouldings are pin gated. Two polypropylenes with different melt viscosities (melt flow indices) were investigated. Experimental focus is put on the effect of the holding pressure, mould temperature and the cooling time on the measured ejection force. Pressure and temperature were continuously monitored with transducers during the filling process. The ejection force was directly measured with load cells. The results show that higher viscosity lends to higher ejection force.
id RCAP_a251f02aea8c0424e82e2ba3fbed675e
oai_identifier_str oai:repositorium.sdum.uminho.pt:1822/34148
network_acronym_str RCAP
network_name_str Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
repository_id_str https://opendoar.ac.uk/repository/7160
spelling Effect of melt viscosity on the ejection force in injection mouldsInjection mouldingInjection mouldsEjection forcePolypropylene.Science & TechnologyThis paper shows data on the ejection force of injection mouldings. The tubular mouldings are pin gated. Two polypropylenes with different melt viscosities (melt flow indices) were investigated. Experimental focus is put on the effect of the holding pressure, mould temperature and the cooling time on the measured ejection force. Pressure and temperature were continuously monitored with transducers during the filling process. The ejection force was directly measured with load cells. The results show that higher viscosity lends to higher ejection force.(undefined)Trans Tech PublicationsUniversidade do MinhoPontes, A. J.Brito, A. M.Pouzada, A. S.20042004-01-01T00:00:00Zconference paperinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://hdl.handle.net/1822/34148engPontes, A. J., Brito, A. M., & Pouzada, A. S. (2004, May 15). Effect of Melt Viscosity on the Ejection Force in Injection Moulds. Materials Science Forum. Trans Tech Publications, Ltd. http://doi.org/10.4028/www.scientific.net/msf.455-456.75508784994150255-547610.4028/www.scientific.net/msf.455-456.755http://doi.org/10.4028/www.scientific.net/msf.455-456.755info:eu-repo/semantics/openAccessreponame:Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)instname:FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologiainstacron:RCAAP2024-07-27T01:22:27Zoai:repositorium.sdum.uminho.pt:1822/34148Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireinfo@rcaap.ptopendoar:https://opendoar.ac.uk/repository/71602025-05-28T15:11:42.370542Repositórios Científicos de Acesso Aberto de Portugal (RCAAP) - FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologiafalse
dc.title.none.fl_str_mv Effect of melt viscosity on the ejection force in injection moulds
title Effect of melt viscosity on the ejection force in injection moulds
spellingShingle Effect of melt viscosity on the ejection force in injection moulds
Pontes, A. J.
Injection moulding
Injection moulds
Ejection force
Polypropylene.
Science & Technology
title_short Effect of melt viscosity on the ejection force in injection moulds
title_full Effect of melt viscosity on the ejection force in injection moulds
title_fullStr Effect of melt viscosity on the ejection force in injection moulds
title_full_unstemmed Effect of melt viscosity on the ejection force in injection moulds
title_sort Effect of melt viscosity on the ejection force in injection moulds
author Pontes, A. J.
author_facet Pontes, A. J.
Brito, A. M.
Pouzada, A. S.
author_role author
author2 Brito, A. M.
Pouzada, A. S.
author2_role author
author
dc.contributor.none.fl_str_mv Universidade do Minho
dc.contributor.author.fl_str_mv Pontes, A. J.
Brito, A. M.
Pouzada, A. S.
dc.subject.por.fl_str_mv Injection moulding
Injection moulds
Ejection force
Polypropylene.
Science & Technology
topic Injection moulding
Injection moulds
Ejection force
Polypropylene.
Science & Technology
description This paper shows data on the ejection force of injection mouldings. The tubular mouldings are pin gated. Two polypropylenes with different melt viscosities (melt flow indices) were investigated. Experimental focus is put on the effect of the holding pressure, mould temperature and the cooling time on the measured ejection force. Pressure and temperature were continuously monitored with transducers during the filling process. The ejection force was directly measured with load cells. The results show that higher viscosity lends to higher ejection force.
publishDate 2004
dc.date.none.fl_str_mv 2004
2004-01-01T00:00:00Z
dc.type.driver.fl_str_mv conference paper
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://hdl.handle.net/1822/34148
url https://hdl.handle.net/1822/34148
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Pontes, A. J., Brito, A. M., & Pouzada, A. S. (2004, May 15). Effect of Melt Viscosity on the Ejection Force in Injection Moulds. Materials Science Forum. Trans Tech Publications, Ltd. http://doi.org/10.4028/www.scientific.net/msf.455-456.755
0878499415
0255-5476
10.4028/www.scientific.net/msf.455-456.755
http://doi.org/10.4028/www.scientific.net/msf.455-456.755
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Trans Tech Publications
publisher.none.fl_str_mv Trans Tech Publications
dc.source.none.fl_str_mv reponame:Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
instname:FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
instacron:RCAAP
instname_str FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
instacron_str RCAAP
institution RCAAP
reponame_str Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
collection Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
repository.name.fl_str_mv Repositórios Científicos de Acesso Aberto de Portugal (RCAAP) - FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
repository.mail.fl_str_mv info@rcaap.pt
_version_ 1833595159304994816

Registros relacionados