Performance of rammed earth subjected to in-plane cyclic displacement

• Main Author: Romanazzi, Antonio
• Publication Date: 2022
• Other Authors: Oliveira, Daniel V., Silva, Rui André Martins, Barontini, Alberto, Mendes, N.
• Format: Article
• Language: eng
• Source: Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
• Download full: https://hdl.handle.net/1822/81767
• topic: Rammed earth; In-plane cyclic loading; Energy-based analysis; Dynamic identification; Stiffness degradation; Seismic capacity; Engenharia e Tecnologia::Engenharia Civil; Science & Technology

Rammed earth structures are worldwide spread, both as architectural heritage and new constructions. Yet, rammed earth buildings present, in general, high seismic vulnerability. Despite the several studies conducted on the mechanical characterisation of rammed earth and on the numerical modelling of structural elements built with this material, further in-plane cyclic tests on rammed earth sub-assemblies are required to characterise their hysteretic behaviour. In this framework, an experimental program was conducted where cyclic in-plane tests were performed on a large-scale rammed earth wall. The geometry of the wall was defined to represent a sub-assembly commonly found in rammed earth dwellings from Alentejo (Southern Portugal). The wall was subjected to cyclic shear displacements with increasing amplitude, imposed in both positive and negative directions. To detect the dynamic properties of the wall and to assess the development of the structural damage, dynamic identification tests were conducted along the experimental programme. The results are analysed in terms of crack pattern, dynamic properties, displacement capacity, base shear performance and stiffness degradation. Further discussion is led on the dissipated energy, while a bi-linear and linear equivalent systems are proposed as simplified modelling approach. In conclusion, degradation of structural capacity was observed due to cyclic loads, while adequate energy dissipation and base shear coefficient were obtained.