On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates

Detalhes bibliográficos
Autor(a) principal: Neves, N. M.
Data de Publicação: 1998
Outros Autores: Isdell, G., Pouzada, A. S., Powell, P. C.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
Texto Completo: http://hdl.handle.net/1822/13402
Resumo: The through-thickness fiber orientation distribution of injection molded polycarbonate plates was experimentally determined by light reflection microscopy and manual digitization of polished cross sections. Fiber length distribution was determined by pyrolysis tests followed by image analysis. A statistical analysis was done to determine the confidence limits of the fiber orientation results. The fiber orientation distribution was described by using second-order orientation tensors. The throughthickness stiffness variations were determined by the orientation averaging approach. This layer stiffness distribution was used to simulate the behavior of beams subjected to three point bending with a FEM Ansys model. The results were compared with experimentally determined flexural stiffness both in the flow direction and in the transverse flow direction. The effect of flow rate and melt-temperature on stiffness and fiber orientation is discussed.
id RCAP_720d83c8fcbd599dcfa72abb5f8b0a43
oai_identifier_str oai:repositorium.sdum.uminho.pt:1822/13402
network_acronym_str RCAP
network_name_str Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
repository_id_str https://opendoar.ac.uk/repository/7160
spelling On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate platesScience & TechnologyThe through-thickness fiber orientation distribution of injection molded polycarbonate plates was experimentally determined by light reflection microscopy and manual digitization of polished cross sections. Fiber length distribution was determined by pyrolysis tests followed by image analysis. A statistical analysis was done to determine the confidence limits of the fiber orientation results. The fiber orientation distribution was described by using second-order orientation tensors. The throughthickness stiffness variations were determined by the orientation averaging approach. This layer stiffness distribution was used to simulate the behavior of beams subjected to three point bending with a FEM Ansys model. The results were compared with experimentally determined flexural stiffness both in the flow direction and in the transverse flow direction. The effect of flow rate and melt-temperature on stiffness and fiber orientation is discussed.Society of Plastics Engineers (SPE)Universidade do MinhoNeves, N. M.Isdell, G.Pouzada, A. S.Powell, P. C.1998-101998-10-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/1822/13402eng0272-839710.1002/pc.10137info:eu-repo/semantics/openAccessreponame:Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)instname:FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologiainstacron:RCAAP2024-05-11T05:52:51Zoai:repositorium.sdum.uminho.pt:1822/13402Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireinfo@rcaap.ptopendoar:https://opendoar.ac.uk/repository/71602025-05-28T15:33:09.569723Repositórios Científicos de Acesso Aberto de Portugal (RCAAP) - FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologiafalse
dc.title.none.fl_str_mv On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
title On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
spellingShingle On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
Neves, N. M.
Science & Technology
title_short On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
title_full On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
title_fullStr On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
title_full_unstemmed On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
title_sort On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates
author Neves, N. M.
author_facet Neves, N. M.
Isdell, G.
Pouzada, A. S.
Powell, P. C.
author_role author
author2 Isdell, G.
Pouzada, A. S.
Powell, P. C.
author2_role author
author
author
dc.contributor.none.fl_str_mv Universidade do Minho
dc.contributor.author.fl_str_mv Neves, N. M.
Isdell, G.
Pouzada, A. S.
Powell, P. C.
dc.subject.por.fl_str_mv Science & Technology
topic Science & Technology
description The through-thickness fiber orientation distribution of injection molded polycarbonate plates was experimentally determined by light reflection microscopy and manual digitization of polished cross sections. Fiber length distribution was determined by pyrolysis tests followed by image analysis. A statistical analysis was done to determine the confidence limits of the fiber orientation results. The fiber orientation distribution was described by using second-order orientation tensors. The throughthickness stiffness variations were determined by the orientation averaging approach. This layer stiffness distribution was used to simulate the behavior of beams subjected to three point bending with a FEM Ansys model. The results were compared with experimentally determined flexural stiffness both in the flow direction and in the transverse flow direction. The effect of flow rate and melt-temperature on stiffness and fiber orientation is discussed.
publishDate 1998
dc.date.none.fl_str_mv 1998-10
1998-10-01T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/1822/13402
url http://hdl.handle.net/1822/13402
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 0272-8397
10.1002/pc.10137
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Society of Plastics Engineers (SPE)
publisher.none.fl_str_mv Society of Plastics Engineers (SPE)
dc.source.none.fl_str_mv reponame:Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
instname:FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
instacron:RCAAP
instname_str FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
instacron_str RCAAP
institution RCAAP
reponame_str Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
collection Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
repository.name.fl_str_mv Repositórios Científicos de Acesso Aberto de Portugal (RCAAP) - FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
repository.mail.fl_str_mv info@rcaap.pt
_version_ 1833595388531048448

Registros relacionados