Design and development of an electronic system for the selective stimulation and simultaneous measurement of the skin impedance

Detalhes bibliográficos
Ano de defesa: 2011
Autor(a) principal: Esser, Eduardo Mussoi
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: eng
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Curitiba
Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/1048
Resumo: It has been found that electrical current applied to the human skin stimulates some of the peripheral nerves and fibers of the human body, causing several reactions such as the increase of sweat production. Moreover the analyses of such reactions can be used to diagnose some diseases, for example diabetes. Nevertheless, most of the electrical stimulation devices, which use mostly square wave signals, are not optimal since they stimulate not only the desired glands (C-fiber) but also the Aδ-fibers of the body, responsible for the fast pain sensation. In this context, this work presents the development of a microcontroller based electronic system for controlling the electrical stimulation of human skin. The objective of the system was to make it possible to test different patterns of electric current pulses, in order to obtain the ideal shape for maximizing the desired stimulation effects with minimal pain. The result of the project was an electronic device that generates electrical pulses based on pre-programmed signals, which are received through a USB interface from a PC. Moreover the system was able to measure the skin impedance value during the electrical stimulation, complementing the diagnosis. The results of the tests carried out with the system showed that the pain intensity during the stimulation could be minimized according to the pulse shape not changing the amplitude and energy of the signal. Moreover a slight difference in the skin impedance was observed when different shapes were applied.