Detalhes bibliográficos
| Ano de defesa: |
2013 |
| Autor(a) principal: |
Bello, Yuri Dal
 |
| Orientador(a): |
Bona, Álvaro Della
|
| Banca de defesa: |
Não Informado pela instituição |
| Tipo de documento: |
Dissertação
|
| Tipo de acesso: |
Acesso aberto |
| Idioma: |
por |
| Instituição de defesa: |
Universidade de Passo Fundo
|
| Programa de Pós-Graduação: |
Programa de Pós-Graduação em Odontologia
|
| Departamento: |
Ciências da Saúde e Ciências Biológicas
|
| País: |
BR
|
| Palavras-chave em Português: |
|
| Palavras-chave em Inglês: |
|
| Área do conhecimento CNPq: |
|
| Link de acesso: |
http://10.0.217.128:8080/jspui/handle/tede/827
|
Resumo: |
The objective of this study was evaluate the apparent interfacial fracture toughness (KA) and microtensile bond strength (σ) of the ceramic/resin adhesion zone, testing the hypothesis that KA and σ are affected by the ceramic surface treatment. Sixteen blocks of feldspatic ceramic (MII- Vita Mark II), were surface-treated with hydrofluoric acid (HF), silane (S), silane + MDP (SM) or combinations. We used Panavia F 2.0 or RelyX U 100 resin cements were used for cementation with resin blocks. The ceramic-cement-resin blocks were cut to fabricate bar-shaped specimens, which were tested in tension (σ). For KA, the specimens were indented (9,8 N; 10 s) with a Vickers indenter in the adhesive interface and loaded to failure in tension. Values of σ and the critical crack size (c) were used to calculate KA (KA = Y σ c1/2). The σ values were statistically analyzed using two-way Anova, Tukey (α=0.05) and Weibull. One-way Anova and Tukey (α=0.05) were used for KA. The association of HF and silane produced the highest values of m. The results of σ and KA were influenced by the ceramic surface treatment |
