Equipamento para realização de ensaios de tração confinada e aquecida em geossintéticos

Detalhes bibliográficos
Ano de defesa: 2014
Autor(a) principal: Massimino, Beatriz de Mello [UNESP]
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Estadual Paulista (Unesp)
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://hdl.handle.net/11449/124506
http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/18-06-2015/000837546.pdf
Resumo: This study adapting equipment that performs the confined creep tests simultaneously with the rise in temperature so that it can perform tensile strength tests under the same conditions (confined-heated). This research aims at the modification of the equipment causing it enables the comparison of geosynthetic tensile performance in various tests formats and in different settings samples. The device also brings the possibility of check how is the material strain during the loading. The tests were performed in biaxial geogrids and divided into two types of test: the first evaluated the performance of the material confined in different temperatures and isolation; in the second, the materials were tested in isolation and at room temperature (without elevation of the test temperature in the system). Confined tests resulted in higher values of tensile strength than conventional ones. It can also be seen that the temperature did not fundamentally modify the results when the material is exposed to it for a short period of time. The variability of the samples had small effect on the results. Moreover, the geogrid showed different behavior observed when different areas of the material through the data acquisition methods