A influência do controlador gupfc no sistema elétrico de potência visando a estabilidade a pequenas perturbações

Detalhes bibliográficos
Ano de defesa: 2014
Autor(a) principal: Valle, Danilo Basseto do [UNESP]
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Estadual Paulista (Unesp)
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://hdl.handle.net/11449/111129
Resumo: This thesis proposes a power injection model for the GUPFC (Generalized Power Flow Controller) which is suited for the GUPFC representation in both power flows and optimal power flows analyses. It is also proposed a model for the control system GUPFC that represents its dynamics in electric power systems. This work main aim is the small signal stability analysis. However, the power injection model of the GUPFC and the structure control model could be used in nonlinear environment. The algebraic equations provided by the power injection model of the GUPFC and the dynamical equations obtained from the control model, are used to analyze the influence of the GUPFC on the system, initially executing a static approach (in steady state) using the expanded power flow tools. The expanded power flow considers the differential variables as algebraic, at a given equilibrium point, and the problem is to find the zeros of a nonlinear function set, whose solution can be obtained by a Newton Raphson method as in a conventional power flow. From the solution of the power flow, it is possible to include directly the corresponding sub matrices of the GUPFC in to the Power Sensitive Model (PSM), which is the chosen model to represent all the dynamic components of the system. Once, every component is modeled in the PSM, a small signal stability is performed. The ESP and POD controllers are included in to the control loop of the Automatic Voltage Regulators (AVR) and the GUPFC respectively, to improve the dynamical performance of the system. To provide additional damping to the unstable or little damped modes and increase the stability limits, a Particle Swarm Optimization (PSO) technique is used to provide the parameters of the supplementary damping controller. Two objective functions are proposed to lead the problem solution to good results and then compared to well known classical techniques