Extração seletiva e pré-concentração de cromo (III) em amostras aquosas por extração em ponto nuvem

Detalhes bibliográficos
Ano de defesa: 2014
Autor(a) principal: Acevedo, Maria Soledad Moura Soares Fernández
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Uberlândia
BR
Programa de Pós-graduação em Química
Ciências Exatas e da Terra
UFU
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://repositorio.ufu.br/handle/123456789/17430
https://doi.org/10.14393/ufu.di.2014.234
Resumo: This work, a procedure for separation and preconcentration of chromium (III) by cloud point extraction and determination by flame atomic absorption spectrometry in mineral water samples was developed. This procedure is based on the formation of the complex of Cr(III) with PAN (1-(2- pyridylazo) 2-naphthol) in the presence of buffer solution of pH 11 and 0.05 % (w/v) Triton X-114 as surfactant. The variables that affect the complex formation, extraction and separation of the phases, such as the concentration of complexing and surfactant agents, the effect of pH and volume of buffer solution were evaluated. An electrolyte solution of NaCl was used to conduce the point cloud formation without the need for heating. From the optimized conditions for determination of Cr(III), detection limit of 0.47 mg L-1, limit of quantification of 1.56 mg L-1 relative standard deviation (RSD) of 3.05 % for n = 10 and enrichment factor of 20.3 were obtained. The accuracy was proved by standard addition and recovery experiments, obtaining quantitative recoveries in the range 88-120%, and the method was applied to samples of mineral water.