Desenvolvimento e construção de um calorímetro para o processo de furação

Detalhes bibliográficos
Ano de defesa: 2015
Autor(a) principal: Silva, Marcos Douglas
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Uberlândia
BR
Programa de Pós-graduação em Engenharia Mecânica
Engenharias
UFU
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://repositorio.ufu.br/handle/123456789/15009
https://doi.org/10.14393/ufu.di.2015.409
Resumo: This study aims to measure and analyze the variation of temperature and cutting forces in a drilling process, establish the relationship between the energy involved in the whole process and heat generated. For this, the present study has designed and built a calorimeter, made of PVC and Technyl, to facilitate the study. After construction of the calorimeter, thermocouples were used conventional K-type, coupled to the equipment Agilent, which is instructed to make acquisition of the temperature variation at the time of drilling. For measurement of the shear stress, it used a rotational Kistler dynamometer. It used specimens cast gray iron and high-speed steel drill, with a diameter of 10.0mm (φ = 10.0mm). The variation of heat generated as well as the variation of torque observed at the time of drilling were presented in graphs and discussed as the proposed mathematical calculations.