Desenvolvimento de uma fonte de potência CA para geração de formas de onda de até 2kHz
Ano de defesa: | 2010 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
Universidade Federal de Santa Maria
BR Engenharia Elétrica UFSM Programa de Pós-Graduação em Engenharia Elétrica |
Programa de Pós-Graduação: |
Não Informado pela instituição
|
Departamento: |
Não Informado pela instituição
|
País: |
Não Informado pela instituição
|
Palavras-chave em Português: | |
Link de acesso: | http://repositorio.ufsm.br/handle/1/8482 |
Resumo: | This work presents the development of an alternating current power source with a single-phase full bridge voltage inverter, based on electronic switches. The source is designed to drive electromechanical and electric plants. The prototype is designed with 1kVA nominal power and is able to generate sinusoidal waveforms up to 2kHz. The inverter operates at the switching frequency of 50kHz. A robust model reference adaptive controller is designed and implemented to adjust the output voltage of the source. Additionally, the elements of the source and the system for measuring the electrical parameters are presented. A digital signal controller is used to control and generate signals with pulse width modulation. The discretization of the control system is performed using the delta operator. Finally, experimental results and analysis of the closed loop system are presented. Based on these results, the experimental performance of the designed source and the proposed control system are examined. |