Projeto e análise de observadores adaptativos aplicados ao controle sensorless de máquinas síncronas de ímãs permanentes

• Ano de defesa: 2018
• Autor(a) principal: Volpato Filho, Cesar José
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de Santa Maria; Brasil; Engenharia Elétrica; UFSM; Programa de Pós-Graduação em Engenharia Elétrica; Centro de Tecnologia
• Palavras-chave em Português: Máquina síncrona de ímãs permanentes; Observador adaptativo; Projeto de ganhos; Estimação de velocidade; Controle sensorless; Permanent magnet synchronous machine; Adaptive observer; Gain design; Speed estimation; Sensorless control; CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
• Link de acesso: http://repositorio.ufsm.br/handle/1/18911

This master dissertation presents contributions to the study, development, and design of adaptive observers applied to the estimation of rotor speed of permanentes magnet synchronous machines. The rst proposed technique is applied for super cial permanent magnet synchronous machines. The estimation method is divided in two observers, a disturbance and an adaptative one. The disturbance observer is used for extraction of the counter-electromotive force and avoid undesired nonlinearities in the adaptive observer design. Rotor speed is estimated by an adaptative observer. For the second method, a full-state adaptive observer is used for speed estimation of interior permanent magnet synchronous machines. Both methods are based on the linear model of the permanent magnet synchronous machine in stationary reference frame. The feedback and adaptive gains are designed considering the state observer and the adaptive algorithm together in state space form. The rotor speed estimator time response is obtained in relation with the system eigenvalues in close-loop. Proper observer pole placement is discused aiming sensorless close-loop control. Simulation and experimental results are presented and the adaptative observers are avaliated in terms of machine speed and position estimation, validating the proposed techniques.