Caracterização das propriedades físicas, químicas e anatômicas da madeira de Maclura tinctoria (L.) D. Don ex Steud.

• Ano de defesa: 2016
• Autor(a) principal: Coldebella, Rodrigo
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de Santa Maria; BR; Recursos Florestais e Engenharia Florestal; UFSM; Programa de Pós-Graduação em Engenharia Florestal
• Palavras-chave em Português: Tajuva; Anatomia da madeira; Densidade básica e ponderada; Constituintes macromoleculares; Cerne e alburno; Wood anatomy; Basic and weighted density; Macromolecular constituents; Heartwood and sapwood; CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL
• Link de acesso: http://repositorio.ufsm.br/handle/1/8782

The imminence of Panambi s dam construction, in the municipality of Alecrim, Rio Grande do Sul, affecting the municipality of Porto Mauá, which will overflow thousands of hectares of rainforest, Macluratinctoria s habitat and, the great exploitation of the specie in the region led to the initiation of this research work. The specie is commonly known as Tajuva, presents arboreal sized, and belongs to the botanical family Moraceae, native of Rio Grande do Sul. It is a semideciduous specie, with heights between 10 to 30 meters and, up to 100 cm of diameter; short trunk, with a smooth bark, grayish green with many yellowed lenticels, many times, with the presence of branched thorns. The study aimed to the realization of anatomical description, the chemical characterization and the basic and weighted densities of Maclura tinctoria(L) D. Don Ex Steud wood. The five studied exemplars were obtained through environmental license, in accordance with current legislation. Three wood samples, taken from BHD were used for the manufacture of histological slides and for the fibers quantification. To the determination of wood density and the chemical analysis of wood, disks were removed from the trunk and divided into opposing wedges. It were used opposing wedges removed from six pre-established heights (base, DAP, 25%, 50%, 75% and 100% of commercial height). It was used the ASTM standards to determinate the density, and from TAPPI to the chemical analysis of wood. The wood was anatomically described and illustrated with photomicrographs. The woody tissue consist mainly of fibers (60 ± 3,4%) and rays (20 ± 2,3%), totaling approximately 80%. The remaining, in other words, 20% are divided into vessels (12 ± 4%) and axial parenchyma (8 ± 3%). The mean values, to the basic density (pb) and weighted density (ppond), were 0,539 and 0,555 g/cm³, respectively. The macromolecular constituents of heartwood and sapwood were determinate separately. The average content found for extractives (18,92; 6,32%); Klason lignin (17,58; 17,55%); holocellulose (63,45; 78,59%); alpha-cellulose ( 35,44; 44,38%); hemicelluloses (28,01; 34,21%) and ashes (1,08; 1,35%), to the heartwood and sapwood, respectively, totaling 102,42 ± 3,1%. The Tajuva s wood brings together the anatomical characteristics prevalent in Moraceae, framing the specie in their respective botanical family. It is considered an evolved specie anatomically. The density presents a decrease in the values in relation to the axial position of the plant. The heartwood is constituted of phenolic compounds and acids in a higher proportion relative to the sapwood, which presents higher starch contents. Studies about the natural durability and the wood quality are fundamental to indicate the best application of wood.