Superação de disjuntores de alta tensão por tensão de restabelecimento transitória no domínio da frequência

Detalhes bibliográficos
Ano de defesa: 2021
Autor(a) principal: Borin, Aquiles Saccol
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Santa Maria
Brasil
Engenharia Elétrica
UFSM
Programa de Pós-Graduação em Engenharia Elétrica
Centro de Tecnologia
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.ufsm.br/handle/1/32609
Resumo: This paper proposes the use of a frequency domain technique to obtain the transient recovery voltage in high voltage circuit breakers. Traditional methods for analyzing circuit breaker transient recovery voltage are based on time-domain simulations. The complexity of the study and the large number of devices that need to be analyzed require methods that demand less computational effort while maintaining an acceptable level of accuracy. These simulations require significant attention from the operator due to the large number of devices and the lengthy processing times. The proposed method uses the equivalent impedance of the system and the short-circuit current that the circuit breaker will interrupt, both in the frequency domain. The transient recovery voltage is calculated from these two elements and converted to the time domain. The results were presented considering three electrical system topologies and compared to time-domain results. The method presented in this paper may be an alternative to traditional transient recovery voltage calculation techniques, reducing system complexity and increasing processing speed.