Efeito do tratamento termomecânico na microestrutura e propriedades mecânicas da ligA CuAl17Mn9 contendo 2.0 at% de cromo

• Ano de defesa: 2022
• Autor(a) principal: Araújo Junior, Francisco Wlaudy Erimar Lourenco de
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso embargado
• Idioma: por
• Instituição de defesa: Universidade Federal da Paraíba; Brasil; Engenharia Mecânica; Programa de Pós-Graduação em Engenharia Mecânica; UFPB
• Palavras-chave em Português: Engenharia Mecânica; Ligas Cu-Al-Mn-Cr; Superelasticidade; Composto intermetálico; Mechanical Engineering; CuAlMnCr alloys; Superelasticity; Intermetallic compound; CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
• Link de acesso: https://repositorio.ufpb.br/jspui/handle/123456789/28006

CuAlMn alloys are quite attractive to various applications due to their unique properties of form memory effect (SME) and overelasticity (SE). Thus, there is a continuous interest in SMAs based on Cu due to its low cost, pronounced thermal conductivity, good processability, as well as the highly cushioned properties, also combined with their elastocalorimetry properties. However, these alloys have their limitations associated with their high fragility which is attributed to high elastic anisotropy, ordered phase formation and rude grain formation. In this work, we seek to improve the properties by applying the process of hot and cold rolling in a CuAl17Mn9Cr2 alloy. This alloy was elaborated in an induction oven in the form of rectangular ingots. The formation of a microstructure was observed the Beta and Alpha phases, as well as chromium -rich intermetallic compounds with a fewer Mn presence. This alloy can easily be rolled into room temperature. Cyclic traction testing tests showed the reach of a 5 % overlap.