Influência do crescimento anormal de grão nas propriedades mecânicas de ligas superelásticas CuAlMnTiB e CuAlMn

• Ano de defesa: 2017
• Autor(a) principal: Alcântara, Carlos Cássio de
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal da Paraíba; Brasil; Engenharia Mecânica; Programa de Pós-Graduação em Engenharia Mecânica; UFPB
• Palavras-chave em Português: Tamanho de grão; Propriedades mecânicas; Crescimento anormal de grão; Ligas superelásticas; Grain size; Mechanical properties; Abnormal grain growth; Superelastic alloys; CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
• Link de acesso: https://repositorio.ufpb.br/jspui/handle/123456789/12885

In this work the influence of the various grain sizes, obtained by refinement and treatment of abnormal grain growth, on the mechanical properties of the superelastic polycrystalline alloys CuAlMnTiB and CuAlMn were investigated. The alloys were prepared in an oven under an ambient atmosphere, thermally treated to obtain coarse grains and then characterized by optical microscopy, x-ray diffraction, traction and microhardness tests. It was noticed that activation of the abnormal grain growth is related to the presence of precipitates and the rate of heating. The alloy with refiners showed to be more sensitive to the activation of the process. In the XRD analysis it was possible to determine the austenitic phase β3, structure L21, the γ phase and the martensitic phase γ’. Through the tensile-test it was possible to note the inversely propotional relationship between the stress-induced martensitic (σy), the tensile strength limit (St) and the maximum strain (εmax) with the increase of the relative grain size (d/t). The microhardness test determined the hardness of the austenitic and martensitic phases.