Análise numérica e projeto de experimento em escala do sistema da camada de água quente do Reator Multipropósito Brasileiro

• Ano de defesa: 2014
• Autor(a) principal: Fernando Lage Araujo Schweizer
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de Minas Gerais; UFMG
• Palavras-chave em Português: Mecânica dos fluidos computacional; Camada de Água Quente (CAQ); Reator Multipropósito Brasileiro (RMB); Engenharia nuclear
• Link de acesso: http://hdl.handle.net/1843/BUOS-9UPMCK

The Brazilian Multipurpose Reactor (RMB) consists in a 30 MW open pool research reactor and its design is currently in development. The RMB is intended to produce a neutron flux applied at material irradiation for radioisotope production and materials and nuclear fuel tests. The reactor is immersed in a deep water pool needed for radiation shielding and thermal protection. A heating and purifying system is applied in research reactors with high thermal power in order to create a Hot Water Layer (HWL) on the pool top preventing that contaminated water from the reactor core neighboring reaches its surface reducing the room radiation dose rate. This dissertation presents a study of the HWL behavior during the reactor operation first hours where perturbations due to the cooling system and pool heating induce a mixing flow in the HWL reducing its protection. Numerical simulations using the CFD code CFX 14.0 have been performed for theoretical dose rate estimation during reactor operation, for a 1/10 scaled down model using dimensional analysis and mesh testing as an initial verification of the commercial code application. Equipments and sensor needed for an experimental bench project were defined by the CFD numerical simulation.