Efeito da sequência de processamento durante a fabricação de instrumentos endodônticos Niti em suas propriedades mecânicas

• Ano de defesa: 2020
• Autor(a) principal: Gustavo De Cristófaro Almeida
• Tipo de documento: Tese
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de Minas Gerais; Brasil; FAO - FACULDADE DE ODONTOLOGIA; Programa de Pós-Graduação em Odontologia; UFMG
• Palavras-chave em Português: Niti; Instrumentos endodônticos; Resistência a fadiga; Resistência a torção; Flexibilidade; Tratamentos térmicos; Métodos de processamento; Endodontia/instrumentação; Maleabilidade; Tratamento térmico; Resistência à tração
• Link de acesso: http://hdl.handle.net/1843/36533; https://orcid.org/0000-0001-5129-5919

The geometric characteristics and manufacturing techniques of endodontic instruments affect clinical performance, fracture resistance, flexibility and other properties. A parameter widely explored in Endodontics is the use of heat treatments, which promote an increase in the resistance to fatigue and flexibility of these materials. This study aimed to evaluate the effect of different heat treatment / machining processes on the physical properties, flexibility, torsional strength and flexural fatigue of Prodesign Logic (PDL) instruments, verifying whether the processing sequence of the instruments would lead to different mechanical behaviors. This system is manufactured using an innovative method that involves performing thermal treatment to obtain shape memory in the NiTi wire prior to machining. The null hypothesis to be tested is that the moment of application of the heat treatment and machining procedures would not affect the physical and mechanical properties of NiTi endodontic instruments. For comparison groups, instrument prototypes with the same geometric and dimensional characteristics were used, being one group of instruments without thermal treatment applied (SEP) and another with thermal treatment carried out in a conventional manner, after machining the instrument (HTP). Physical and microstructural characterization were performed with differential scanning calorimetry (DSC) tests and X-ray diffractometry (XRD) tests, in addition to mechanical tests divided into torsion tests, 45° bending and resistance to flexural fatigue. The results showed that macroscopically there were no major change in the characteristics of the three groups of instruments, except for color changes due to different processing sequences. The DSC results showed that at room temperature the alloy is mainly austenitic in the SEP group and that after the heat treatment carried out in the PDL and HTP groups, there was a change in the transformation temperatures, with an increase in the Af temperature and predominance of the NiTi alloy in phase R. The XRD results confirmed the DSC findings. Differences in the parameters measured between different types of instruments in the tests of torsional resistance, bending at 45º and flexural fatigue were always considered with a significance level of 95%. The results for the flexibility tests showed that the HTP group proved to be the most flexible, with the lowest values, followed by PDL and SEP. In the results of the torsion tests it was possible to observe that SEP presented higher values of torque followed by PDL and HTP (p <.05). Fatigue resistance tests showed higher mean NCF values for HTP, followed by PDL and SEP. However, a worse behavior of the PDL would only be evidenced clinically if the instruments were used several times greater than that recommended by the manufacturer. It can be concluded that changing the manufacturing process of endodontic instruments, inverting the machining and heat treatment steps, led, in fact, to a change in the mechanical behavior of Prodesign Logic instruments in relation to the prototypes.