Avaliação dos efeitos da injeção de gás na câmara de vácuo do modelo físico de um desgaseificador RH

• Ano de defesa: 2008
• Autor(a) principal: Leonardo Neves
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de Minas Gerais; UFMG
• Palavras-chave em Português: Injeção de gás; Descarburação; Câmara de vácuo; Desgaseificador RH; Engenharia metalúrgica; Metalurgia extrativa
• Link de acesso: http://hdl.handle.net/1843/MAPO-7QJPTK

Steels with low concentrations of nitrogen, hydrogen and carbon have in large demand lately. The RH process is a secondary refining process that can simultaneously attain significant levels of removal of these interstitial elements from liquid steel. In the RH process, the melt circulation rate plays a very important role in determiningproductivity of the equipment, since it affects the decarburization rate.In the present work, a physical model of a RH degasser in a 1:5 scale of an industrial reactor has been built and used in the study of the circulation rate and of the kinetics of decarburization. The effects of the gas flow rate and of the configurations of the nozzles used in the injection of the gas have been analyzed. The effect of gas injection in the vacuum chamber was also investigated.The decarburization reaction of liquid steel was simulated using a reaction involving CO2 and caustic solutions. The concentration of CO2 in the solution was evaluated using pH measurements.The experimental results indicated that the kinetic of decarburization is controlled by mass transfer in the liquid phase. It was also observed that, in certain configurations, the injection of gas in the vacuum chamber can increase the decarburization rate.