Efeito do pré-resfriamento da água em placas porosas de sistemas de resfriamento evaporativo

• Ano de defesa: 2020
• Autor(a) principal: Fernandes, João Levi Bastos
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de Lavras; Programa de Pós-Graduação em Engenharia Agrícola; UFLA; brasil; Departamento de Engenharia
• Palavras-chave em Português: Instalações agropecuárias - Climatização; Sistema evaporativo; Conforto térmico; Agroindustry facilities - cooling; Evaporative system; Thermal comfort; Engenharia Agrícola
• Link de acesso: http://repositorio.ufla.br/jspui/handle/1/39958

Thermal control inside several agricultural facilities is an issue that has required several researches. Thus, the aim of this study was to evaluate the pre-chilled water effect applied on porous plate of evaporative cooling systems. The experiment was carried out on two physical models built on a small and distorted scale with evaporative cooling through cellulose panels with wetting by chilled water (CWCS) and an identical system to the previous one, however with panel wetting by natural water (NWCS). Air dry-bulb temperature (tdb), black-globe temperature (tbg) and air relative humidity (RH) were measured inside of the physical models and the external environment at 10 seconds interval. Physical models represent agricultural facilities equipped with ventilation as negative pressure wind tunnel. From the measured data, the temperature-humidity index (THI), the black globe-humidity index (BGTH), the enthalpy (h) and the cooling effectiveness () were calculated in both physical models built in reduced scale. The pre-chilled water used in porous plates wetting of evaporative cooling systems provided a greater reduction in thermal variables and comfort indexes compared to wetting with water at room temperature.