Aspectos luminotécnicos e da qualidade da energia de lâmpadas com tecnologia LED, fluorescente e vapor de mercúrio

• Ano de defesa: 2021
• Autor(a) principal: Rosa, Lucas Loures
• Orientador(a): Alvarenga, Bernardo Pinheiro de
• Banca de defesa: Alvarenga, Bernardo Pinheiro de, Santos, Euler Bueno dos, Belchior, Fernando Nunes
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal de Goiás
• Programa de Pós-Graduação: Programa de Pós-graduação em Engenharia Elétrica e da Computação (EMC)
• Departamento: Escola de Engenharia Elétrica, Mecânica e de Computação - EMC (RG)
• País: Brasil
• Palavras-chave em Português: Harmônicas; Cargas não lineares; Lâmpada fluorescente; Lâmpada a vapor de mercúrio; Lâmpada de LED
• Palavras-chave em Inglês: Harmonics; Non-linear loads; Fluorescent lamp; Mercury vapor lamp; LED lamp
• Área do conhecimento CNPq: ENGENHARIAS::ENGENHARIA ELETRICA::MATERIAIS ELETRICOS
• Link de acesso: http://repositorio.bc.ufg.br/tede/handle/tede/11874

The advancement of technology and power electronics has allowed a strong advance in large-scale production of electronic devices, which are incorporated into existing electrical systems, in most cases, so there is a change scenario in the type of interconnected load to the electricity distribution system. However, these devices can cause changes in the behavior of system components, caused by harmonics that can result in various damages to electrical equipment. These devices are attractive to consumers, as they offer the opportunity to consume less electricity, as in the case of lamps with active power less than conventional by more than 50%. The electrical characteristics of these devices must be better known so that the feeder circuits can be correctly dimensioned, as well as strategies to solve possible problems arising from unwanted effects. In this context, this work constitutes an analysis, performing confrontations between data obtained from traditional and more modern (“efficient”) devices, in a lighting system in the industrial sector. Among traditional devices, this research addresses fluorescent and mercury vapor lamps and, in the case of modern lamps, LED. In this sense, case studies are presented, with different types of technologies, which allow obtaining indicators of the power quality, with satisfactory precision and reliability. It is important to point out that the data referring to the experimental part were collected in an industrial environment, with the purpose of providing a qualitative and quantitative analysis, with the best possible fidelity.