Efeito da concentração de parafina na formação de hidratos de metano em emulsões de agua em óleo mineral

Detalhes bibliográficos
Ano de defesa: 2022
Autor(a) principal: Melhorim, Guilherme Rainho
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal do Espírito Santo
BR
Mestrado em Engenharia Mecânica
Centro Tecnológico
UFES
Programa de Pós-Graduação em Engenharia Mecânica
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.ufes.br/handle/10/15953
Resumo: The ow of oil through the pipes generates high mixing rates due to the intense shocks on the walls of these pipes. In addition, at the bottom of the ocean there is a combination of two factors: high pressures and low temperatures. These particu larities represent the main causes of hydrate nucleation, which is a solid compound where low molecular weight molecules are encapsulated by water molecules. The for mation of hydrates triggers a series of problems in the oil industry, which can block the ow of oil and cause production losses. There are large areas of importance involving hydrates, from climate change concerns to the development of sustainable technologies. A third application of hydrates concerns ow assurance, vital for the oil and gas industry. It is in this area that we will focus our studies. For this, the formation of methane hydrates is investigated using water-in-mineral oil emulsions at high pressures and low temperatures. Span80 surfactant is used to stabilize the emulsions. Initially, some parameters are varied to observe their e ects: shear rate, cooling temperature and average droplet diameter. Finally, the e ect of the paraf n concentration on the formation of hydrates is analyzed. For this, a rotational rheometer and a pressure cell are used to simulate a pressurized environment.