Desgaste erosivo de revestimentos WC-Cr-Co depositados via processos de soldagem PTA-P e por manta sinterizada

Detalhes bibliográficos
Ano de defesa: 2016
Autor(a) principal: Bragança, Bruno Corveto
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal do Espírito Santo
BR
Mestrado em Engenharia Mecânica
Centro Tecnológico
UFES
Programa de Pós-Graduação em Engenharia Mecânica
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
621
Link de acesso: http://repositorio.ufes.br/handle/10/9811
Resumo: This work studies the solid particle erosion behavior of WC-Co-Cr coatings, deposited by welding process PTAP (Plasma Transferred Arc Powder) and infiltration brazed. These materials are used for covering components subject to erosive wear, since they are hard phase coatings with ductile matrix. Tests were performed in the gas blast erosion test apparatusavailable in the Laboratory TRICORRMAT (Tribology, Corrosion and Materials) at UFES (Universidade Federal do Espírito Santo), in three different conditions. In the first condition, the particle was alumina, with an impact angle of 90° at hightemperatureof 375°C. For the second and third conditions studied, test were performed at room temperature with hematite as particle, and the variable evaluated was the angle of impact, consisting of 90 and 30. For all three conditions, the impact speed was 70 m/s and the flux rateof particles was 2 mg/mm².s. Tests were conducted to ASTM G 76.The wear mechanisms were investigated by MEV images. It’ll show that the microstructures originated by deposition process influenced wear rate directly. Besides that, the effects of temperature and particle hardness will be understood