Dimensionamento à punção em apoios internos de lajes protendidas sem aderência

• Ano de defesa: 2015
• Autor(a) principal: Leite Junior, Jose Carlos Cirino
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Instituição de defesa: Universidade Federal do Espírito Santo; BR; Mestrado em Engenharia Civil; Centro Tecnológico; UFES; Programa de Pós-Graduação em Engenharia Civil
• Palavras-chave em Português: prestressed slabs; punching shear; internal columnS; codes; lajes protendidas; punção; normas; pilar interno; Lajes de concreto; Concreto protendido; Normas técnicas (Engenharia); Lajes – Testes; Engenharia Civil; 624
• Link de acesso: http://repositorio.ufes.br/handle/10/1813

This work studies the punching shear in prestressed slabs with unbonded tendons, for internal columns, calculated by ABNT NBR 6118:2007, ABNT NBR 6118:2014, EN 1992-1-1:2004 and ACI 318-11. Punching shear calculations will be presented in order to obtain comparative results analysis. Also, there are three situations presented of non-destructive load tests for punching shear, in real slabs. The cases, calculated using the four compared regulation codes, provide a basis for assessments of the conservatism level among the formulations. After the theoretical analysis, in general, it is concluded that EC2:2004 and NBR 6118:2014 are the codes that generate less conservative results in punching shear calculation. However, ACI 318-11 and the NBR 6118:2007 obtain the most conservative results for this design. Considering the maximum loads without the use of punching shear reinforcement ACI 318 generates values comparable to EC2 and NBR 6118:2014. The most conservative results are always generated by NBR 6118:2007.