Obtenção, caracterização e aplicação de uma nova superfície seletiva para coletores solares térmicos

• Ano de defesa: 2011
• Autor(a) principal: Vieira, Samuel Guerra
• Tipo de documento: Dissertação
• Tipo de acesso: Acesso aberto
• Idioma: por
• Palavras-chave em Português: Engenharia mecânica; Placas (Engenharia); Superfícies (Tecnologia); Energia solar; Materiais
• Link de acesso: http://www.repositorio.ufc.br/handle/riufc/15918

The study of selective coating for thermal solar collectors has been carried out with focus on the use of selective paints and coatings for copper and aluminum plates, which are used to manufacture the absorber plate. The processes, such as electrodeposition, used in these paints and coatings are expensive and they increasing the price of the final product. The use of composite obtained from chromium oxide, iron oxide, and titanium oxide in a ceramic process using the screen-printing deposition technique is an alternative to develop new selective coating with approximately the same thermal efficiency, but at a lower cost than the commercial ones. The results show that the absorptivity values measured with the new coatings are close to those presented by the manufacturers in the commercial sufaces. The objective is to obtain and characterize selective surfaces based on chromium, iron and titanium and compares them to other areas already marketed (metal oxides), find the values of absorptivity and characterize them by raman and infrared spectroscopy.