Modelagem computacional da válvula antecipadora de onda como mecanismo de alívio para o golpe de aríete

Detalhes bibliográficos
Ano de defesa: 2010
Autor(a) principal: Barbosa, João Marcelo Costa
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Não Informado pela instituição
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://www.repositorio.ufc.br/handle/riufc/16834
Resumo: In this work was made Hydraulic Transient simulations with anticipation valve with opening and closing complete and non-instantaneous, as a mechanism of relief for water hammer. The valve must be located near the pump. Thus in this work, the valve in advance shall be applied to the second node of the pipelines in question. The software UFC6 was used for estimates the Transient and was produced by the Study Group on Computational Fluid of UFC. Anticipation is a mechanism for relief from water hammer that starts opening when the low pressure of regulation is exceeded, after the passage of the wave of low pressure. The fluid expelled must be placed on a spring or stored in a reservoir in order to accommodate the volume of fluid to be expelled. In this work, the Anticipation Valve is modeling into the water as a fluid. It uses the method of characteristics for simulations. Due to the lack of studies in this area, this research aims to contribute to the design of anticipation valves and a basis for further work.