ESTUDO DA INOCULAÇÃO DE ALUMÍNIO POR TIB2, PROCESSADO POR MOAGEM DE ALTA ENERGIA

Detalhes bibliográficos
Ano de defesa: 2014
Autor(a) principal: Silva, Cristiano da
Orientador(a): Cintho, Osvaldo Mitsuyuki lattes
Banca de defesa: Rodrigues Neto, João Batista lattes, Hupalo, Marcio Ferreira lattes
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: UNIVERSIDADE ESTADUAL DE PONTA GROSSA
Programa de Pós-Graduação: Programa de Pós-Graduação em Engenharia e Ciências de Materiais
Departamento: Desenvolvimento e Caracterização de Materiais
País: BR
Palavras-chave em Português:
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: http://tede2.uepg.br/jspui/handle/prefix/1440
Resumo: This work aims at verifying the influence of processing by high energy ball milling of titanium diboride (TiB2), to increase the effect of grain refining of high-purity aluminum. Various mills were carried out by varying the ratio of the initial TiB2 and aluminum charges. After obtaining the milling products, they were compressed in a cylindrical array as a uniaxial compressive stress of 100MPa, some were later sintered at 600°C for 30 minutes. The tablets were introduced in the metal bath of aluminum and castings at 800°C in thermal analysis cups. In metal baths, experiments with and without the presence of titanium as a solute, in addition to the variation of the content of TiB2 (0.15 and 0.30 wt%) can be observed. The results indicate a significant reduction in grain size, especially in the samples were nucleated with pellets which were sintered before being added to the bath.