Influência da mistura gasosa e da temperatura no processo de nitrocarbonetação a plasma do aço DIN 100Cr6

Detalhes bibliográficos
Ano de defesa: 2018
Autor(a) principal: Fontes, Marcos Alves
Orientador(a): Nascente, Pedro Augusto de Paula lattes
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de São Carlos
Câmpus São Carlos
Programa de Pós-Graduação: Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Palavras-chave em Inglês:
Área do conhecimento CNPq:
Link de acesso: https://repositorio.ufscar.br/handle/20.500.14289/10439
Resumo: The surface treatments of metal alloys allow improving the surface qualities by the deposition of another material or by surface modification, producing coatings. The nitrocarburizing, considered one of the most important thermochemical treatments, involves the simultaneous diffusion of N and C into the surface. Understanding and controlling the formation of the nitrocarburized layer have considerable industrial interest due to the improvements regarding wear, fatigue, and corrosion resistances on the metals and their alloys. In the present work, surface modification by plasma nitrocarburizing was performed in a DIN 100Cr6 steel. The studied process parameters were the treatment temperature (550 and 600°C) and methane concentration in the gas mixture (0, 1.0, 1.5, and 2.0%), whereas the treatment time was fixed in 2h. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses, as well as wear resistance and micro-hardness tests were used to characterize the samples. The results show that the modifications on the material surface considerably improve the mechanical properties such as hardness and wear resistance, by the formation of nitrides. The compound layer composition and morphology are quite sensitive to the temperature and chemical composition of the treatment atmosphere. Increasing the CH4 concentration on the gas mixture contributes to the formation of the epsilon-Fe2-3 (C,N) phase, considerably enhancing the wear resistance and microhardness, and the use of high N2 concentration induces the production of a micro-porosity layer. Ferritic nitrocarburizing promotes thinner micro-porosity and compound layers, with predominant epsilon phase, and higher superficial microhardness, and the austenitic nitrocarburizing produces a thicker micro-porosity and compound layers, with predominant epsilon and gama’-Fe4N phases on the compound layer.