Avaliação da vibração aplicada em seccionador vertical reverso utilizando o método dos elementos finitos
Zapisane w:
| 1. autor: | |
|---|---|
| Data wydania: | 2019 |
| Format: | Master thesis |
| Język: | por |
| Źródło: | Repositório Institucional da UPF |
| Download full: | https://repositorio.upf.br/handle/123456789/4121 |
Streszczenie: | The Disconnector is a switching device used in Substations, which connects the electrical circuit to the Substation and allows the protection of the system. Within a Substation, the ideal is that the equipment has remote activation. But in the case of the Disconnector, its drive is partially automated, as it may happen that the closing maneuver is not completed. In order to complete the closing of the electrical contacts remotely, there is a solution which consists in to fix an electromechanical vibration motor to the disconnector structure. The vibration produced by this device is transmitted to the main contacts, reducing the friction and residual stresses of the mechanisms, promoting their closure. To test this solution, a detailed three-dimensional model of the structure was made, and the analysis was done with a program that uses the Finite Element Method. The objective of the analyzes was to study the frequency of excitation of the electrical contact of the disconnector, to evaluate how the support structure of the disconnector behaves with the excitation that causes the contacts to fit, and to determine the frequency of the activation of the vibration motor electromechanical. After the threedimensional model was finalized, the boundary conditions were applied with the Ansys Workbench Ls-Dyna Software, and the natural frequencies of the system were identified. In order to validate the model, an experimental test was carried out to verify the natural frequencies. The values of natural frequencies were used to study the excitation of the electric contact, and a frequency value was obtained that produced good results in the displacement of the mobile contact, which was used to make several simulations in the Software. And with the simulations it was possible to evaluate the behavior of the structure with the vibration, and to determine the drive frequency and torque of the electromechanical vibration motor. |
Podobne zapisy: Avaliação da vibração aplicada em seccionador vertical reverso utilizando o método dos elementos finitos
- Estudo experimental da aplicação de vibração mecânica no processo de manobra de chaves seccionadoras
- Desenvolvimento de procedimento para posicionamento e fixação de sistema de vibração unidirecional em chave seccionadora de alta tensão
- Avaliação da utilização de válvulas pneumáticas de retenção pilotada em sistemas de posicionamento eletromecânico
- Projeto e concepção de motovibrador linear para aplicação em manobras de chaves seccionadoras de alta tensão
- Conversor tensão-corrente em tecnologia cmos para um conversor analógico/digital de um sistema em chip
- Estudo numérico-experimental de otimização topológica utilizando elementos finitos