MIMO techniques and applications

Detalhes bibliográficos
Autor(a) principal: Silva, Mário Marques da
Data de Publicação: 2014
Outros Autores: Correia, Américo
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
Texto Completo: http://hdl.handle.net/11144/3117
Resumo: First generation of cellular networks (1G) were analogue, having been deployed between 1980 and 1992. 1G included a myriad of cellular systems, namely the total access communication system (TACS), the advanced mobile phone system (AMPS), the Nordic mobile telephony (NMT), among others. These systems were of low reliability, low capacity, low performance, and without roaming capability between different networks and countries. The multiple access technique adopted was frequency division multiple access (FDMA), where signals of different users are transmitted in different (orthogonal) frequency bands. The second generation of cellular networks (2G), like the global system for mobile communications (GSM), was widely used between 1992 and 2003. This introduced the digital technology in the cellular environment, with a much better performance, better reliability, higher capacity, and even with the roaming capability between operators, due to its high level of standardization and technological advancements. The multiple access technique used by GSM was time division multiple access (TDMA), where signals generated by different users were transmitted in different (orthogonal) time slots. Narrowband code division multiple access (CDMA) system was adopted in the nineties by IS-95 standard, in the United States. IS-95 was also a 2G system. Afterwards, the Universal Mobile Telecommunications System (UMTS), standardized in 1999 by the Third Generation Partnership Project (3GPP) release 99 (see Table 1.1), proceeded with its utilization, in this particular case using the Wideband CDMA (WCDMA). The UMTS consists of a third generation cellular system (3G). The CDMA concept relies on different spread spectrum transmissions, each one associated to a different user’s transmission, using a different (ideally orthogonal) spreading sequence. The long term evolution (LTE) can be viewed as the natural evolution of 3G , using a completely new air interface, as specified by 3GPP release 8, and enhanced in its release 9. Its initial deployment took place in 2010. The LTE comprises an air interface based on orthogonal frequency division multiple access (OFDMA) in the downlink and single carrier - frequency division multiple access (SC-FDMA) in the uplink. This allows a spectral efficiency improvement by a factor of 2 to 4, as compared to the high speed packet access (HSPA), making use of new spectrum, different transmission bandwidths from 1.4 MHz up to 20 MHz, alongside with multiple input multiple output (MIMO) systems and the all-over IP architecture.
id RCAP_c3a0c927b89ddbaa7c4512607016c20c
oai_identifier_str oai:repositorio.ual.pt:11144/3117
network_acronym_str RCAP
network_name_str Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
repository_id_str https://opendoar.ac.uk/repository/7160
spelling MIMO techniques and applicationsCellular CommunicationsMIMO SystemsWireless CommunicationsFirst generation of cellular networks (1G) were analogue, having been deployed between 1980 and 1992. 1G included a myriad of cellular systems, namely the total access communication system (TACS), the advanced mobile phone system (AMPS), the Nordic mobile telephony (NMT), among others. These systems were of low reliability, low capacity, low performance, and without roaming capability between different networks and countries. The multiple access technique adopted was frequency division multiple access (FDMA), where signals of different users are transmitted in different (orthogonal) frequency bands. The second generation of cellular networks (2G), like the global system for mobile communications (GSM), was widely used between 1992 and 2003. This introduced the digital technology in the cellular environment, with a much better performance, better reliability, higher capacity, and even with the roaming capability between operators, due to its high level of standardization and technological advancements. The multiple access technique used by GSM was time division multiple access (TDMA), where signals generated by different users were transmitted in different (orthogonal) time slots. Narrowband code division multiple access (CDMA) system was adopted in the nineties by IS-95 standard, in the United States. IS-95 was also a 2G system. Afterwards, the Universal Mobile Telecommunications System (UMTS), standardized in 1999 by the Third Generation Partnership Project (3GPP) release 99 (see Table 1.1), proceeded with its utilization, in this particular case using the Wideband CDMA (WCDMA). The UMTS consists of a third generation cellular system (3G). The CDMA concept relies on different spread spectrum transmissions, each one associated to a different user’s transmission, using a different (ideally orthogonal) spreading sequence. The long term evolution (LTE) can be viewed as the natural evolution of 3G , using a completely new air interface, as specified by 3GPP release 8, and enhanced in its release 9. Its initial deployment took place in 2010. The LTE comprises an air interface based on orthogonal frequency division multiple access (OFDMA) in the downlink and single carrier - frequency division multiple access (SC-FDMA) in the uplink. This allows a spectral efficiency improvement by a factor of 2 to 4, as compared to the high speed packet access (HSPA), making use of new spectrum, different transmission bandwidths from 1.4 MHz up to 20 MHz, alongside with multiple input multiple output (MIMO) systems and the all-over IP architecture.CRC Press2017-06-21T16:11:08Z2014-01-01T00:00:00Z2014info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/11144/3117eng978-1-4665-9807-2978-1-4665-9808-910.1201/b17021-2Silva, Mário Marques daCorreia, Américoinfo:eu-repo/semantics/openAccessreponame:Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)instname:FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologiainstacron:RCAAP2024-08-01T02:06:30Zoai:repositorio.ual.pt:11144/3117Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireinfo@rcaap.ptopendoar:https://opendoar.ac.uk/repository/71602025-05-28T18:43:08.799171Repositórios Científicos de Acesso Aberto de Portugal (RCAAP) - FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologiafalse
dc.title.none.fl_str_mv MIMO techniques and applications
title MIMO techniques and applications
spellingShingle MIMO techniques and applications
Silva, Mário Marques da
Cellular Communications
MIMO Systems
Wireless Communications
title_short MIMO techniques and applications
title_full MIMO techniques and applications
title_fullStr MIMO techniques and applications
title_full_unstemmed MIMO techniques and applications
title_sort MIMO techniques and applications
author Silva, Mário Marques da
author_facet Silva, Mário Marques da
Correia, Américo
author_role author
author2 Correia, Américo
author2_role author
dc.contributor.author.fl_str_mv Silva, Mário Marques da
Correia, Américo
dc.subject.por.fl_str_mv Cellular Communications
MIMO Systems
Wireless Communications
topic Cellular Communications
MIMO Systems
Wireless Communications
description First generation of cellular networks (1G) were analogue, having been deployed between 1980 and 1992. 1G included a myriad of cellular systems, namely the total access communication system (TACS), the advanced mobile phone system (AMPS), the Nordic mobile telephony (NMT), among others. These systems were of low reliability, low capacity, low performance, and without roaming capability between different networks and countries. The multiple access technique adopted was frequency division multiple access (FDMA), where signals of different users are transmitted in different (orthogonal) frequency bands. The second generation of cellular networks (2G), like the global system for mobile communications (GSM), was widely used between 1992 and 2003. This introduced the digital technology in the cellular environment, with a much better performance, better reliability, higher capacity, and even with the roaming capability between operators, due to its high level of standardization and technological advancements. The multiple access technique used by GSM was time division multiple access (TDMA), where signals generated by different users were transmitted in different (orthogonal) time slots. Narrowband code division multiple access (CDMA) system was adopted in the nineties by IS-95 standard, in the United States. IS-95 was also a 2G system. Afterwards, the Universal Mobile Telecommunications System (UMTS), standardized in 1999 by the Third Generation Partnership Project (3GPP) release 99 (see Table 1.1), proceeded with its utilization, in this particular case using the Wideband CDMA (WCDMA). The UMTS consists of a third generation cellular system (3G). The CDMA concept relies on different spread spectrum transmissions, each one associated to a different user’s transmission, using a different (ideally orthogonal) spreading sequence. The long term evolution (LTE) can be viewed as the natural evolution of 3G , using a completely new air interface, as specified by 3GPP release 8, and enhanced in its release 9. Its initial deployment took place in 2010. The LTE comprises an air interface based on orthogonal frequency division multiple access (OFDMA) in the downlink and single carrier - frequency division multiple access (SC-FDMA) in the uplink. This allows a spectral efficiency improvement by a factor of 2 to 4, as compared to the high speed packet access (HSPA), making use of new spectrum, different transmission bandwidths from 1.4 MHz up to 20 MHz, alongside with multiple input multiple output (MIMO) systems and the all-over IP architecture.
publishDate 2014
dc.date.none.fl_str_mv 2014-01-01T00:00:00Z
2014
2017-06-21T16:11:08Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/11144/3117
url http://hdl.handle.net/11144/3117
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 978-1-4665-9807-2
978-1-4665-9808-9
10.1201/b17021-2
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv CRC Press
publisher.none.fl_str_mv CRC Press
dc.source.none.fl_str_mv reponame:Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
instname:FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
instacron:RCAAP
instname_str FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
instacron_str RCAAP
institution RCAAP
reponame_str Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
collection Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
repository.name.fl_str_mv Repositórios Científicos de Acesso Aberto de Portugal (RCAAP) - FCCN, serviços digitais da FCT – Fundação para a Ciência e a Tecnologia
repository.mail.fl_str_mv info@rcaap.pt
_version_ 1833597614215397376