Study of novel lithium salt-based, plasticized polymer electrolytes

• Autor(a) principal: Silva, Maria Manuela
• Data de Publicação: 2002
• Outros Autores: Barros, Sandra Cerqueira, Smith, Michael John, MacCallum, James R.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositórios Científicos de Acesso Aberto de Portugal (RCAAP)
• Texto Completo: https://hdl.handle.net/1822/32292
• topic: Polymer electrolytes; Conductivity; Thermal analysis; Plasticizer; lithium perchlorate; lithium triflate; plasticizers; Ciências Naturais::Ciências Químicas; Ciências Naturais::Ciências Químicas; Science & Technology

The results of a preliminary investigation of a series of polymer electrolytes based on a novel polymer host, poly(trimethylene carbonate) or p(TMC), with lithium triflate or lithium perchlorate and various plasticizing additives, are described in this presentation. Electrolytes with lithium salt compositions of about n = 10 (where n represents the molar ratio of (O=COCH2CH2CH2O) units per lithium ion) and additive compositions between 5 and 15 wt% (with respect to p(TMC)), were prepared by co-dissolution of salt and polymer in anhydrous solvent with a controlled amount of additive. The homogeneous solutions obtained were evaporated within a preparative glovebox and under a dry argon atmosphere to form thin films of electrolyte. The solvent-free electrolyte films produced were characterized by measurements of total ionic conductivity, differential scanning calorimetry and thermogravimetry. In general the triflate-based electrolytes were found to show moderate ionic conductivity and good thermal stability while perchlorate-based electrolytes showed higher levels of conductivity but lower thermal stability. Electrolytes based on this host polymer, with both lithium salts, were obtained as very flexible, transparent, completely amorphous films.